Optima+ Firmware Update

You are here

There have been some firmware improvements in recent months. We recommend upgrading the firmware to v. 2.2 in all USB devices with serial numbers starting from "18". This upgrade  resolves occasional issues with extra noise in measured signals in some USB devices with serial numbers starting from "18". The directions that follow on this page are from Neurobit: http://www.neurobitsystems.com/download/Neurobit_Optima_Plus-firmware.htm

Upgrade instructions

  1. Download the latest firmware file. Save to your Downloads folder or somewhere you will be able to locate later.

  2. Run BioExplorer.

  3. Open the Neurobit device settings window.

  4. On the General tab, click the Device services button.

  5. Click Browse to select the downloaded firmware file.

  6. Connect the Neurobit Optima+ USB device with a USB cable.

  7. Turn on the device and wait for its beep signal.

  8. Click the Upload button and wait for the completion.
    (In case of any transmission problem click the Upload button again.)

  9. Click the Exit button.

How To Video: