Wiz Test with Electrodes

You are here

1. Select 4 Channel mode and Helper Off




Settings for BioExplorer


settings  for BioEra

Settings for BioEra

2. Connect electrodes to all inputs on the Q-wiz

You will need seven total: 4 active, 2 reference and 1 ground. For saline, put all electrode assemblies into a jar of saline solution. For paste, stick all the electrode heads into a jar of Ten20 conductive paste together.

3. Press play in the software.

Using any 4 channel design, start the software. You should see a flat line for the trace on all 4 channels.